OUR OBJECTIVE
•The association is a public, non-profit organisation established for the following sole objective:
To set the standards for the transparent security barrier industry and maintain such standards.
Installation
minimum standards:
•Holes in bar must be at least 1 mm larger in diameter than the fixing screw/pop rivet;
•The edge of the hole in bar must be 1.5 times the thickness of the bar away from the bar edge;
•Maximum spacing of 120 mm between bars - if fixing points are < 700 mm apart;
•Maximum spacing of 100 mm between bars - if fixing points are > 700 mm apart;
•Maximum spacing of 100 mm between bars - if fixing points are > 1000 mm apart, plus cross sections are required;
•Only stainless-steel rivets may be used - no aluminium pop rivets for burglar bars may be used;
•Minimum of 40 mm (length) woodscrews or similar may be used on wood;
•Minimum of 1-year installers warranty;
•Installation
must be as secure as possible.
Inform your client
Information on quotation or document to customer:
List TBASA minimum standards for polycarbonate and installation;
Confirm that the polycarbonate used for installation will apply to TBASA minimum standards;
Confirm that the installation specifications and methods used will apply to TBASA minimum standards;
TBASA
member number.
Quarantee to client
•1-Year
workmanship warranty;
•Qualified
technicians;
•Professional
and courteous;
•Strict
Code of Conduct - TBASA.
Assurance
•Insurance
companies -
Ensure that TBASA minimum standards comply with insurance standards, and that
its concerns are kept close at heart.
•Suppliers -
Ensure that ONLY polycarbonate materials which comply with TBASA specifications
are distributed for security barriers.
•DIY -
The product must comply with TBASA minimum standards with clear installation
instructions for the use of burglar bars.